Product center
Product name：Hot melt filter bag
Production process：Hot melt welding
Material：
PP: polypropylene needle felt PE: polyester needle felt
Product introduction：
The full hot melt filter bag adopts three-dimensional deep structure and hot melt seamless combination technology, which ensures the filtration efficiency and does not produce leakage. It is suitable for medium and low viscosity liquid filtration environment, with stable high filtration flow rate, and can effectively intercept various soft and hard impurities.
•Different seal rings can be provided, suitable for various filters
•Full hot melting process ensures no side leakage
•The material does not contain silicone and other additives to avoid chemical leakage
•The surface of the filter material adopts special heat treatment process, Eliminate fiber shedding
•It can meet the requirements of food-grade filtration
Available in size
01: Φ 180x430mm 02: Φ 180x810mm 03: Φ 102x230mm 04: Φ 102x380mm 05: Φ 105x510mm
Selectable accuracy (microns)
1μm，5μm，10μm，25μm，50μm，75μm，100μm，200μm，300μm
Technical parameters
Operating pressure difference: 2.5bar It is recommended to replace the differential pressure: ≈ 0.8 to 1.5 bar Service temperature: Polypropylene:<90 ° C Polyester:<140 ° C
Recommended traffic
01:20m3/h 02:40m3/h 03:6m3/h 04:12m3/h 05:20m3/h
Automobile coating system
Lubricating oil、Hydraulic oil
Chemical industry
Ink
Edible oil、fruit juice
Water
Electrophoretic paint、Electroplating solution filtration
